2-3Field DescriptionValue of maximum query response time forIGMP(in seconds): 10The maximum response time for IGMP generalqueries is 10 seconds (default).Value of robust count for IGMP: 2 The IGMP robustness variable is 2 (default).Value of startup query interval for IGMP(inseconds): 15The IGMP startup query interval is 15 seconds(default).Value of last member query interval for IGMP(inseconds): 1The IGMP last member query interval is 1 second(default).Value of query timeout for IGMP version 1(inseconds): 400The query timeout time for IGMPv1 is 400seconds (default).Policy to accept IGMP reports: noneIGMP multicast group filtering policy forcontrolling the access to multicast groups.“None” means no filtering policy is applied;otherwise, the applied policy is displayed. Forexample, “acl 2000, only for IGMP version 1”means ACL 2000 is applied only on IGMPv1reports.Querier for IGMP: 10.1.0.5 (this router) The IGMP querier address is 10.1.0.5 (thisdevice).IGMP group limit: 256 The maximum number of IGMP multicast groupsthat can be joined on the VLAN interface is 256.Total 1 IGMP group reported Total number of IGMP multicast groups on theinterface is 1.igmp enableSyntaxigmp enableundo igmp enableViewInterface viewParametersNoneDescriptionUse the igmp enable command to enable IGMP on an interface.Use the undo igmp enable command to disable IGMP on an interface.By default, IGMP is disabled on an interface. .These commands do not take effect until the multicast routing feature is enabled. You need to use thiscommand before you can configure other IGMP features.Related commands: multicast routing-enable.Examples# Enable IGMP on VLAN-interface 10.
