1-7interface-type: Interface type.interface-number: Interface number.module-name: Functional module name.fabric: Specifies to display the enabled debugging of the switches in the Fabric.by-module: Specifies to display fabric debugging by module.DescriptionUse the display debugging command to display enabled debugging on a specified device or the wholeFabric.Examples# Display enabled debugging on unit 1. display debugging unit 1IP icmp debugging is onRip packet debugging switch is onRip receive debugging switch is onRip send debugging switch is ondisplay versionSyntaxdisplay versionViewAny viewParametersNoneDescriptionUse the display version command to display the version information about the switch system.Specifically, you can use this command to check the software version and release time, the basichardware configuration, and some other information about the switch.Examples# Display the version information of the system. display versionH3C Comware Platform SoftwareComware Software, Version 3.10, Test 1545Copyright (c) 2004-2007 Hangzhou H3C Technologies Co., Ltd. All rights reserved.S3600-52P-EI uptime is 0 week, 0 day, 23 hours, 15 minutesS3600-52P-EI with 1 Processor64M bytes DRAM16384K bytes Flash Memory
