2-2display igmp interfaceSyntaxdisplay igmp interface [ interface-type interface-number ]ViewAny viewParametersinterface-type interface-number: Specifies an interface by its type and number. With this argumentprovided, the command displays the IGMP configuration and running information on the specifiedinterface; otherwise, the command displays the IGMP information on all interfaces running IGMP.DescriptionUse the display igmp interface command to display the IGMP configuration and running informationon the specified interface or all interfaces.Examples# Display the IGMP configuration and running information on Vlan-interface 1. display igmp interface Vlan-interface 1Vlan-interface1 (10.153.17.99):IGMP is enabledCurrent IGMP version is 2Value of query interval for IGMP(in seconds): 60Value of other querier time out for IGMP(in seconds): 120Value of maximum query response time for IGMP(in seconds): 10Value of robust count for IGMP: 2Value of startup query interval for IGMP(in seconds): 15Value of last member query interval for IGMP(in seconds): 1Value of query timeout for IGMP version 1(in seconds): 400Policy to accept IGMP reports: noneQuerier for IGMP: 10.153.17.99 (this router)IGMP group limit is 256Total 1 IGMP group reportedTable 2-2 display igmp interface command output descriptionField DescriptionVlan-interface1 (10.153.17.99): Interface name (IP address)IGMP is enabledIGMP is currently enabled on the interface.If IGMP is not enabled, no output information isdisplayed.Current IGMP version is 2 IGMP version 2 (default) is running on thecurrent interface.Value of query interval for IGMP(in seconds): 60 The IGMP query interval is 60 seconds (default).Value of other querier time out for IGMP(inseconds): 120The other querier present interval is 120 seconds(default).
