2-12igmp timer querySyntaxigmp timer query secondsundo igmp timer queryViewInterface viewParametersseconds: IGMP query interval, namely the interval between IGMP general query messages, in therange of 1 to 65,535 seconds.DescriptionUse the igmp timer query command to configure the interval between IGMP general query messages.Use the undo igmp timer query command to restore the default.By default, the IGMP query interval is 60 seconds.A multicast router periodically sends IGMP general query messages onto the attached subnets todetermine whether multicast group members are present on the subnets. The IGMP query interval canbe tuned according to the practical conditions of the network.Related commands: igmp timer other-querier-present.Examples# Set the IGMP query interval to 150 seconds on VLAN-interface 2. system-viewSystem View: return to User View with Ctrl+Z.[Sysname] interface Vlan-interface 2[Sysname-Vlan-interface2] igmp timer query 150igmp versionSyntaxigmp version { 1 | 2 }undo igmp versionViewInterface viewParameters1: Specifies IGMP version 1.2: Specifies IGMP version 2.DescriptionUse the igmp version command to specify the version of IGMP to run on the interface.Use the undo igmp version command to restore the default.
