2 - 12 Quick Start & Interface MenuIntroductionUse this section to program the cordless system to work with your terminal orcomputer (host system).This programming section contains the following menu selections:• Plug and Play• Terminal Interface• Country Code• Keyboard• Output Delays• Wand Emulation• Power Settings• Reset Factory Settings and Status CheckAll operating parameters are stored in nonvolatile memory resident in thecordless system, where they are permanently retained in the event of a powerinterruption. When you receive your cordless system, certain operatingparameters have already been set. These are the factory defaults, indicated byan asterisk (*) on the programming pages (beneath the default programming barcode). Default Charts that list all the factory settings may be found near the endof this System Manual.A Programming Chart (found on the inside back cover of this manual) containsalphanumeric bar codes for setting additional programming options, such as thedigits representing Symbology Message Length. The chart explains how andwhen to use the alphanumeric bar codes.A Sample Bar Codes pages (located near the back of this manual) provides barcode symbols you may scan to verify that your cordless system has beenprogrammed correctly and is communicating with your host system.
