4 - 4Backlight ControlA backlight is provided for viewing the display in darkened area. Backlight controlis a scanner independent control, not part of the work group settings.To access the backlight control, press and release the FN key, then the BACK(BK) key. The backlight control opens, and the setting immediately changes.Each time the BACK key is pressed, the backlight toggles between two states:SCRIPT and ON. Other keys will have no effect.The backlight control closes when you pull the trigger or press any key (otherthan the BACK key), or when a timeout expires. When the backlight controlcloses, the new setting is saved and the display screen is restored. SCRIPT isthe default setting. In the SCRIPT state, the script application controls thebacklight. In the ON state, the backlight is on regardless of the script application.Battery/Radio IndicatorsTo view battery and radio status, press and release the FN key, and then thewildcard key (*). System icons and 4-segment bar graphs indicate batterystrength and radio contact with the base. The battery and radio status viewcloses when you pull the trigger, press any key, or when a timeout expires. If theradio is in communication with the base, you will receive a signal indicator. If theradio is out of range from the base, if there is no power to the base, or if thescanner is not associated with a base, no radio indicators display.Note: If the battery is low and you pull the trigger and a battery appears in thebottom right of the display, or the aiming line does not illuminate, youshould charge the battery.ONSCRIPTCharged Battery IndicatorLow Battery Indicator andLoss of Radio Contactwith Baseand Radio Contact withBase
