If you make configuration changes and then change the page without Applying orSaving the changes, the changes are not processed.Saving Configuration Changes Across a Reset or Power CycleIn order for configuration changes to be retained across a reset or power cycle, youmust issue a SAVE command. Configuration changes can be permanently saved byeither of these actions:v Clicking the SAVE button.v Going to the System Utilities Menu and selecting Save All Applied Changes.Making Configuration Changes via SNMPThis section provides information on making configuration changes, getting thechanges put into effect, and retaining the changes across a power cycle when usingSNMP.Making Configuration ChangesYou make configuration changes via SNMP by issuing SNMP Set commands toMIB objects that the 8275-416 supports as read-write.Processing Configuration ChangesWhen the SNMP Set is received, the 8275-416 checks the data to ensure that it isvalid. If it is invalid, the SNMP error code BADVALUE is returned in the SNMP SetResponse. Otherwise, the configuration change is processed and put into effect.Saving Configuration Changes Across a Reset or Power CycleConfiguration changes made via SNMP Set commands are not automaticallyretained across a reset or power cycle. To get these changes retained across areset or power cycle, you must issue a SAVE. This can be done via the 8275-416private MIB using swDevCtrlSaveConfiguration.Chapter 3. Configuring your 8275-416 23
