v Code (the default)v ConfigurationFor Uploadv Configurationv Error logv System tracev Trap log (the default)Upload or Download ModeThe mode is either XMODEM or TFTP. XMODEM is only valid when filetransfer is initiated via the serial EIA 232 port. The default value isXMODEM.Start Transfer Now:You indicate Yes or No.File Name:The file name can be up to 16 alphanumeric characters. The 8275-416remembers the last file name used. The default value is blank.Note: File Name, File Path, and TFTP Server IP Address are applicableonly if the Transfer Mode is TFTP.File Path:The directory path where the file is located. The 8275-416 remembers thelast file path used. The default value is blank.TFTP Server IP Address:The IP address of the server where the file is located. It is valid only whenthe Transfer Mode is TFTP. The address is 4 decimal bytes ranging from 0to 255. The default value is zeroes.Reset Utility8275-416 allows you to reset the 8275-416 without powering off. Reset means thatall network connections are terminated and the boot code executes. The 8275-416uses the stored configuration to initialize the 8275-416 . You are prompted forconfirmation if you want the reset to proceed. A successful reset is evidenced bythe LEDs on the 8275-416 .After selecting Reset Menu from the System Utilities Menu, you are given thechoice of the resets you can request as shown Figure 44 on page 57.56 8275-416 User’s Guide
