Note: See “System replaceable units” on page 144 to determine which components should be replaced by a fieldservice technician.Error code/symptom FRU/action00019501(Microprocessor 1 is not functioning -check VRM and microprocessor LEDs)1. If possible, update BIOS code and service processor firmware.2. VRM 13. Microprocessor 14. System board00019502(Microprocessor 2 is not functioning -check VRM and microprocessor LEDs)1. If possible, update BIOS code and service processor firmware.2. VRM 23. Microprocessor 200019701(Microprocessor 1 failed) 1. If possible, update BIOS code and service processor firmware.2. Microprocessor 13. System board00019702(Microprocessor 2 failed) 1. If possible, update BIOS code and service processor firmware.2. Microprocessor 23. System board00180100(A PCI adapter has requested memoryresources that are not available.)1. Reorder the adapters in the PCI slots. It is important that yourstartup device is positioned early in the startup-device order sothat it is run by POST.2. Ensure that the PCI adapter and all other adapters are set correctlyin the Configuration/Setup Utility program Utility program. If thememory resource settings are not correct, change the settings.3. If all memory resources are being used, you might need to removean adapter to make memory available to the PCI adapter. Disablingthe adapter BIOS on the adapter might correct the error. (See thedocumentation provided with the adapter.)00180200(No more I/O space available for PCIadapter)1. Run the Configuration/Setup Utility program.2. Failing adapter.3. System board.00180300(No more memory (above 1MB for PCIadapter))1. Run the Configuration/Setup Utility program.2. Failing adapter.3. System board.00180400(No more memory (below 1MB for PCIadapter))1. Run the Configuration/Setup Utility program.2. Move the failing adapter to slot 1.3. Failing adapter.4. System board.00180500(PCI option ROM checksum error) 1. Remove failing PCI card.2. System board.00180600(PCI to PCI bridge error) 1. Run the Configuration/Setup Utility program.2. Move the failing adapter to slot 1.3. Failing adapter.4. System board00180700, 00180800(General PCI error) 1. System board2. PCI cardChapter 6. Symptom-to-FRU index 113
