6. Remove the center-fan and adapter-support bracket.a. Press the release tab on each adapter-support bracket latch. There are twolatches; one at each end of the adapter-support bracket.b. Slide the adapter-support bracket and fan-support bracket unit out of theguides; then, remove it from the server.Note: To reinstall the adapter-support bracket and other components that youremoved or disconnected, reverse the preceding steps. Remember toreroute the cables that you disconnected and to reconnect the center-fancable to the system board (see “System-board internal connectors” onpage 78).Center-fan support bracket (dual fan guide)Note:v Read “Installation guidelines” on page 11.v Read Appendix B, “Safety information,” on page 153.v Read “Handling static-sensitive devices” on page 12.When working with some options, you must first remove the center-fan to accesscertain components or connectors on the system board.Chapter 4. Service replaceable units 69
