Optional-device problemsv Follow the suggested actions in the order in which they are listed in the Action column until the problemis solved.v See Chapter 4, “Parts listing, Type 7377 server,” on page 125 to determine which components arecustomer replaceable units (CRU) and which components are field replaceable units (FRU).v If an action step is preceded by “(Trained service technician only),” that step must be performed only by atrained service technician.v Go to the IBM support Web site at http://www.ibm.com/systems/support/ to check for technicalinformation, hints, tips, and new device drivers or to submit a request for information.Symptom ActionAn IBM optional device that wasjust installed does not work. 1. Make sure that:v The device is designed for the server (see http://www.ibm.com/servers/eserver/serverproven/compat/us/).v You followed the installation instructions that came with the device and thedevice is installed correctly.v You have not loosened any other installed devices or cables.v You updated the configuration information in the Setup utility. Whenevermemory or any other device is changed, you must update the configuration.2. Reseat the device that you just installed.3. Replace the device that you just installed.An IBM optional device thatused to work does not worknow.1. Make sure that all of the hardware and cable connections for the device aresecure.2. If the device comes with test instructions, use those instructions to test thedevice.3. Reseat the failing device.4. Follow the instructions for device maintenance, such as keeping the headsclean, and troubleshooting in the documentation that comes with the device.5. Replace the failing device.50 IBM System x3630 M3 Type 7377: Problem Determination and Service Guide
