IDK NJR-R04HD User Manual
                                                                                              | |
Contents
| 
NJR-T04HD / NJR-R04HD User’s Guide4710.2.3 Aspect ratioYou can set the aspect ratio for each video input.If you select “AUTO-1” or “AUTO-2,” the aspect ratio is restored automatically to the original ratio according tothe input signal.“AUTO-1” and “AUTO-2” work differently only when a letter box signal is presented to the input. “AUTO-1”processes them as a 16:9 or 14:9 video signal, while “AUTO-2” sets them as 4:3.Normally, no problem occurs if you set the aspect ratio to “AUTO-1”, but some DVD players and other devicesdisplay subtitles or setup menus in the un-displayed area. In such case, set the aspect to “AUTO-2” to displaythe entire area of the video signal.Setting options of “16:9”, “14:9”, “4:3”, ”16:9 / 14:9 LETTER BOX”, and ”4:3 / 14:9 SIDE PANEL” areaccessible only when a TV signal is input. When PC signal is input, the aspect ratio will be restoredautomatically according to the aspect ratio of the input signal regardless of the settings:“AUTO-1”, ”AUTO-2”, ”16:9”, ”14:9”, ”4:3”, “16:9/14:9 LETTER BOX”, and ”4:3/14:9 SIDE PANEL”.“FULL”: video signal is displayed always in full screen mode.“THROUGH”: video signal is displayed always in pixel 1:1.If “10.5.7 Video type” is set to “All Inputs”, each input video is converted to 1920×1080 so that output aspectratio is 16:9.Setting forFor each HDMI input connector, each input signalIf “10.11.1 Devices to be connected” is set to “NJR-T01UHD or NJR-R01UHD is included” or “10.5.7Video type” is set to “All Inputs”, @SAP communication command cannot be used.Setting valueAUTO-1 [Default] 14:9 LETTER BOXAUTO-2 4:3 SIDE PANEL4:3 14:9 SIDE PANEL16:9 FULL14:9 THROUGH16:9 LETTER BOXCommunication command@SAP Setting aspect ratio@GAP Getting aspect ratioNJR-T04HD |
Related manuals for IDK NJR-R04HD
manualsdatabase
Your AI-powered manual search engine