NJR-T04HD / NJR-R04HD User’s Guide5610.2.12 Videowall enabled / disabled and coordinate gridYou can enable / disable videowall and set horizontal / vertical coordinate points.Once this menu is changed, the settings of “10.2.5 Display position”, “10.2.6 Setting display size”, “10.2.7Masking”, “10.5.10 Frame delay” will be initialized.Input signal Videowall disabled Videowall enabledTransmitterNJR-T04HDNJR-T01UHDNJR-T04HDVideo other than 4K4K video4K videoNJR-T01UHD4K video[Fig. 10.4] Videowall enabled / disabled(0, 0)(Horizontal, Vertical)(1, 0) (2, 0) (3, 0) (4, 0)(0, 1) (1, 1) (2, 1) (3, 1) (4, 1)(0, 2) (1, 2) (2, 2) (3, 2) (4, 2)(0, 3) (1, 3) (2, 3) (3, 3) (4, 3)(0, 4) (1, 4) (2, 4) (3, 4) (4, 4)[Fig. 10.5] Videowall coordinate gridSetting forFor each HDMI output connectorNotes:・ For 4K video: Videowall cannot be enabled / disabled for each output separately.・ For video other than 4K video: Since OUT1’s synchronous signal is used for videowall, ensure toenable OUT1’s setting when using Videowall.NJR-R04HD
