NJR-T04HD / NJR-R04HD User’s Guide7110.5.10 Frame delayTime lag occurring between upper and lower monitors can be avoided by setting “10.2.14 Frame delay” to“Normal mode”.If “10.2.14 Frame delay” is set to “Expand mode” and videowall is enabled, set this menu of all outputs to thesame value (1-fram latency or 2-frame delay).Setting forFor each HDMI output connectorSettings for when videowall is enabled and disabled can be kept separately.【See: 10.2.12 Videowall enabled / disabled and coordinate grid】Setting valueNo frame delay1-frame delay2-frame delay[Table 10.21] Default value of frame delay10.2.12 Videowall enabled /disabled and coordinate grid10.2.14 Frame delay DefaultDisabled － No frame delay for all outputsEnabled Normal mode OUT1:0,OUT2:0,OUT3:1,OUT4:1Expand mode 1-frame delay for all outputsCommunication command@SDL Setting frame delay@GDL Getting frame delayNJR-R04HD
