IDK NJR-R04HD User Manual

Contents

IDK NJR-R04HD User Manual Manual pdf 50 page image

NJR-T04HD / NJR-R04HD User’s Guide5010.2.6 Setting display sizeYou can set the display size of input video.The video size is scaled based on the upper left quadrant of the input video.【See: 10.2.5 Display position】Setting forNJR-T04HD: For each HDMI input connector, each input signalIf “10.11.1 Devices to be connected” is set to “NJR-T01UHD or NJR-R01UHD is included”or “10.5.7 Video type” is set to “All Inputs”, @SNS communication command cannot beused.NJR-R04HD: For each HDMI output connectorFor outputs whose “10.2.12 Videowall enabled / disabled and coordinate grid” is set to“Enabled”, the setting of OUT1 will be applied.Display size can be set for each output separately, in the following cases. However, ifreduction ratio is not the same, the smallest reduction ratio will be applied.▪ An NJR-T01UHD is used as a transmitter and 4K video is input.▪ An NJR-T04HD is used as a transmitter and “10.11.1 Devices to be connected”is set to “NJR-T01UHD or NJR-R01UHD is included” and “10.5.7 Video type” isset to IN1 to IN4.Settings for when videowall is enabled and for when videowall is disabled can be keptindividually.Setting valueHorizontal display size[Table 10.10] Setting horizontal display sizeModel 10.5.7 Video type Set value DefaultNJR-T04HD All Inputs 1920÷4 to 1920×4 1920Input video of IN1 to IN4 Horizontal input resolution÷4 tohorizontal input resolution×4Horizontal inputresolutionNJR-R04HD － Horizontal output resolution÷6to horizontal outputresolution×6HorizontaloutputresolutionVertical display size[Table 10.11] Setting vertical display sizeModel 10.5.7 Video type Set value DefaultNJR-T04HD All Inputs 1080÷4 to 1080×4 1080Input video of IN1 to IN4 Vertical input resolution÷4 tovertical input resolution×4Vertical inputresolutionNJR-R04HD － Vertical output resolution÷6 tovertical output resolution×6Vertical outputresolutionCommunication command@SNS Setting display size@GNS Getting display sizeNJR-T04HD / NJR-R04HD