NJR-T04HD / NJR-R04HD User’s Guide57Setting value[Table 10.18] Videowall settingItem Setting value DefaultVideowall with video other than4KDisabled / Enabled EnabledVideowall with 4K video fromNJR-T04HDDisabled / Enabled DisabledVideowall with 4K video fromNJR-T01UHDDisabled / Enabled EnabledHorizontal coordinate point －1,0 to videowall screen number －1 OUT1:0,OUT2:1,OUT3:0,OUT4:1Vertical coordinate point －1,0 to videowall screen number－1 OUT1:0,OUT2:0,OUT3:1,OUT4:1If “-1” is specified to the horizontal or vertical coordinate point, videowall setting is enabled / disabledwithout changing coordinate point.Communication command@SWA Setting videowall enabled / disabled and coordinate grid@GWA Getting videowall enabled / disabled and coordinate grid10.2.13 BezelYou can set the bezel of monitors in pixels.Setting valueLeft bezel: 0 to 200 [Default]: 0Right bezel: 0 to 200 [Default]: 0Top bezel: 0 to 200 [Default]: 0Bottom bezel: 0 to 200 [Default]: 0Communication command@SBE Setting bezel@GBE Getting bezelNJR-R04HD
