IDK NJR-R04HD User Manual
                                                                                              | |
Contents
| 
NJR-T04HD / NJR-R04HD User’s Guide4910.2.5 Display positionYou can set the position where input video is displayed.Setting forNJR-T04HD: For each HDMI input connector, each input signal“10.11.1 Devices to be connected” is set to “NJR-T01UHD or NJR-R01UHD is included”or “10.5.7 Video type“ is set to “All Inputs”, @SNP communication command cannot beused.NJR-R04HD: For each HDMI output connectorSettings for when videowall is enabled and for when videowall is disabled can be keptindividually.【See: 10.2.12 Videowall enabled / disabled and coordinate grid】Setting valueHorizontal display position[Table 10.8] Horizontal display positionModel 10.5.7 Video type Set value DefaultNJR-T04HD All Inputs －Horizontal display size to ＋ 1920 0Input video of IN1 to IN4 －Horizontal display size to ＋Horizontal input resolution0NJR-R04HD － －Horizontal display size to ＋Horizontal output resolution0Vertical display position[Table 10.9] Vertical display positionModel 10.5.7 Video type Set value DefaultNJR-T04HD All Inputs －Vertical display size to ＋ 1080 0Input video of IN1 to IN4 －Vertical display size to ＋ Verticalinput resolution0NJR-R04HD － －Vertical display size to ＋ Verticaloutput resolution0Communication command@SNP Setting display position@GNP Getting display position@SPS Setting relative movement of display positionNJR-T04HD / NJR-R04HD |
Related manuals for IDK NJR-R04HD
manualsdatabase
Your AI-powered manual search engine