NJR-T04HD / NJR-R04HD User’s Guide5510.2.11 Videowall screen numberYou can set the number of screens that display a video signal simultaneously.Once this menu is changed, the videowall coordinate grid will be changed automatically as follows and thesettings of “10.2.5 Display position”, “10.2.6 Setting display size”, “10.2.7 Masking”, “10.5.10 Frame delay”will be initialized.・OUT1: Horizontal coordinate point＝0, vertical coordinate point＝0・OUT2: Horizontal coordinate point＝1, vertical coordinate point＝0・OUT3: Horizontal coordinate point＝0, vertical coordinate point＝1・OUT4: Horizontal coordinate point＝1, vertical coordinate point＝1【See: 10.2.12 Videowall enabled / disabled and coordinate grid】Setting value[Table 10.17] Videowall screen10.2.14 Frame delay Set value DefaultNormal mode 1 to 2 2Expand mode 1 to 5 21×1: Videowall is disabled. Video will be distributed to each output.Communication command@SVW Setting videowall screen number@GVW Getting videowall screen numberNJR-R04HD
