NJR-T04HD / NJR-R04HD User’s Guide6710.5.5 Output video for when no input videoYou can set the color of the video to be output when no video signal is input from the selected input.If “10.5.4 Synchronous signal output for when no input video” is set to “OFF”, synchronous signal is notoutput.Setting forNJR-T04HD: “10.5.7 Video type” is set to “All Inputs”, @SBO cannot be used and black is output.NJR-R04HD: For each HDMI output connectorSetting valueBlackBlue [Default]Background colorCommunication command@SBO Setting output video for when no input video@GBO Getting output video for when no input video10.5.6 Deep ColorYou can set the deep color of HDMI output.Setting forFor each HDMI output connectorSetting value24-BIT COLOR [Default]30-BIT COLORNote:Since the transmission clock of ”30-BIT COLOR” is faster than that of “24-BIT COLOR”, noise may occur if alow-quality cable or long cable is connected. In those cases, the noise may be removed by selecting”24-BITCOLOR”.Communication command@SDC Setting Deep Color@GDC Getting Deep ColorNJR-R04HDNJR-T04HD / NJR-R04HD
