Icom IC-2200H Instruction Manual

Also see for IC-2200H: Service manual Instruction manual Addendum Service manual Instruction manual

Contents

Icom IC-2200H Instruction Manual Manual pdf 101 page image

8814SPECIFICATIONS1314GENERAL• Frequency coverage : (unit: MHz)USA, Asia, Australia Tx: 144–148/Rx: 118–174*Europe Tx: 144–146/Rx: 118–174*Europe-1, Taiwan, Korea Tx/Rx: 144–146*Guaranteed: 144–148 MHz range only.• Type of emission : FM, AM (Receive only)• Number of memory channels : 207 (incl. 6 scan edges and 1 call)• Frequency resolution : 5, 10, 12.5, 15, 20, 25, 30, 50 kHz• Operating temperature range : –10°C to +60°C; +14˚F to +140˚F• Frequency stability : ±10 ppm (–10°C to +60°C)• Power supply requirement : 13.8 V DC ±15%• Current drain (at 13.8 V DC: approx.) :Transmit at 65 W 15 AReceive standby 0.8 Amax. audio 1.0 A• Antenna connector : SO-239 (50 Ω)• Dimensions (proj. not included) : 140(W) × 40(H) × 146(D) mm5 1 ⁄ 2 (W)×1 9⁄ 16(H)×5 3⁄ 4(D) in• Weight (approx.) : 1.25 kg; 2 lb 12 ozTRANSMITTER• Modulation system : Variable reactance frequency mod.• Output power :(*approx., † Korea version)• Max. frequency deviation : ±5.0 kHz [Wide]/±2.5 kHz [Narrow]‡• Spurious emissions : Less than –60 dBc• Microphone connector : 8-pin modular (600 Ω)RECEIVER• Receive system : Double-conversion superheterodyne• Intermediate frequencies : 1st: 21.7 MHz, 2nd: 450 kHz• Sensitivity (at 12 dB SINAD) : 0.14 μV typical• Squelch sensitivity (threshold) : 0.1 μV typical• Selectivity :[Wide] More than ±6 kHz/6 dBLess than ±14 kHz/60 dB[Narrow] ‡ More than ±3 kHz/6 dBLess than ±9 kHz/55 dB• Spurious and image rejection : 75 dB typical• AF output power (at 13.8 V DC) : More than 2.4 W at 10% distortion withan 8 Ω load• Ext. speaker connector : 3-conductor 3.5 (d) mm (1⁄ 8″)/8 Ω• Ext. Data connector : 3-conductor 2.5 (d) mm (1⁄ 8″)‡Some version onlyAll stated specifications are subject to change without notice or obligation.Power outputTaiwan65 W (50 W †) 24 W25 W* 10 W*10 W* N/A5 W* 5 W*PowerSelectionHighMiddleMid. lowLow