Icom IC-2200H Instruction Manual

Also see for IC-2200H: Service manual Instruction manual Addendum Service manual Instruction manual

Contents

Icom IC-2200H Instruction Manual Manual pdf 42 page image

295 MEMORY OPERATION Programming channel namesEach memory channel and the call channel can be pro-grammed with an alphanumeric channel name for easyrecognition and can be indicated independently by channel.Names can be a maximum of 6 characters— see the tablebelow for available characters.q Push [M/CALL ] to select memory mode.w Rotate [DIAL] to select the desired memory channel.e Push [MONI ] for 1 sec. to select channel name indi-cation mode.• 1 short and 1 long beep sound.r Push [SET ] to select the channel name program-ming condition.• Frequency readouts disappear.t Rotate [DIAL] to select the desired character.• The selected character blinks.y Push [SET] or [MONI] to move the cursor to left or right,respectively.u Repeat steps t and y until the desired channel namesare displayed.i Push any key other than [SET] or [MONI] to program thename and exit the channel name programming condition.o Push [MONI ] for 1 sec. to return to frequency indi-cation if desired.IMPORTANT!: Once channel name indication mode isselected, always access the channel name programmingcondition when [SET ] is pushed.When set mode accessing is necessary, cancel the chan-nel name indication by pushing [MONI ] for 1 sec.,then access to set mode.ANMLOCKANMLOCKANMPRIO(1)(B)(L)(V)(+)(2)(C)( M)(W)(–)(3)(D )(N)(X)(=)(4)(E)(O)(Y)(✱)(5)(F)(P)(Z)(/)(6)(G)(Q)(space)(7)(()(H)( R)())(8)(I)(S)(|)(9)(J)(T)(0)(A)(K)(U)[EXAMPLE]: Programming “CLUB” into memory channel 1.LOCKS E TANMMONIDUPLOWT-SCANTONEPRIOM/CALLSCANV/MHzDIGITAL PRIO AO BUSYMUTENARMIDLOWLOCKS E TANMMONIDUPLOWT-SCANTONEPRIOM/CALLSCANV/MHzDIGITAL PRIO AO BUSYMUTENARMIDLOWLOCKS E TANMMONIDUPLOWMUTENARMIDLOWLOCKS E TANMMONIDUPLOWMUTENARMIDLOWANMMONI( )LOCKSET( ) ANMMONI( ) LOCKSET( ) ANMMONI( )Push any other keys thanor .Select memory channel 15,then push for 1 sec.Push orto move the cursor.Rotate to select thecharacter. Repeatprevioussteps.