8613OTHER FUNCTIONS13 Data cloningCloning allows you to quickly and easily transfer the pro-grammed contents from one transceiver to another; or , datafrom a personal computer to a transceiver using the optionalCS-2200H CLONING SOFTWARE .D Cloning between transceiversq Connect the OPC-474 cloning cable to the [SP] jack of themaster and sub-transceivers.• The master transceiver is used to send data to the sub-trans-ceiver.w While pushing [M/CALL], turn power ON toenter cloning mode (mas-ter transceiver only—power on only for sub-transceiver).• “CLONE” appears and thetransceivers enter the clonestandby condition.e Push [S.MW ] on themaster transceiver.• “CL OUT” appears in themaster transceiver’s displayand the S/RF indicator showsthat data is being transferredto the sub-transceiver.• “CL IN” appears automati-cally in the sub-transceiver’sdisplay and the S/RF indica-tor shows that data is beingreceived from the mastertransceiver.r When cloning is finished,turn power OFF, then ONto exit cloning mode.MWLOCKS E TANMMONIDUPLOWT-SCANTONEPRIOM/CALLSCANV/MHzDIGITAL PRIO AO BUSYMUTENARMIDLOWPush to start cloning(master transceiver).MWS.MWPRIOLOCKS E TANMMONIDUPLOWT-SCANTONEPRIOM/CALLSCANV/MHzDIGITAL PRIO AO BUSYMUTENARMIDLOWPRIOM/CALL( ),While pushingturn power ON.AT POWER ON
