Icom IC-2200H Instruction Manual

Also see for IC-2200H: Service manual Instruction manual Addendum Service manual Instruction manual

Contents

Icom IC-2200H Instruction Manual Manual pdf 61 page image

4810POCKET BEEP AND TONE SQUELCH910 Pocket beep operationThis function uses subaudible tones for calling and can beused as a “common pager” to inform you that someone hascalled while you were away from the transceiver.D Waiting for a call from a specific stationq Set the operating frequency.w Push [SET ] to enter set mode.e Push [SET] or [MONI] several times until “Ct” for tonesquelch or “dt” for DTCS squelch appears.r Rotate [DIAL] to select the desired tone squelch frequencyor DTCS code.t When operating the pocket beep function with DTCSsquelch, push [SET] once then rotate [DIAL] to select theDTCS polarity.y Push any key other than [SET] or [MONI] to exit set mode.u Push [TONE ] several times until “ ” or “ ”are displayed to turn ON the pocket beep with tonesquelch or DTCS squelch, respectively.i When a signal with the matched tone is received, thetransceiver emits beep tones and blinks “ ”.• Beep tones sound for 30 sec. and “ ” blinks. To stop the beepsand blinking manually, push any key. When the beep tones arenot stopped manually, “ ” continues flashing until step o isoperated.o Push [PTT] to answer.• “ ” disappears and cancels the pocket beep function automati-cally.!0 Push [TONE ] several times until “ ” or “ ” dis-appears to cancel the tone squelch or DTCS squelch func-tion.T-SCANLOCKS E TANMMONIDUPLOWT-SCANTONEPRIOM/CALLSCANV/MHzDIGITAL PRIO AO BUSYMUTENARMIDLOWLOCKS E TANMMONIDUPLOWT-SCANTONEPRIOM/CALLSCANV/MHzDIGITAL PRIO AO BUSYMUTENARMIDLOWLOCKS E TANMMONIDUPLOWT-SCANTONEPRIOM/CALLSCANV/MHzDIGITAL PRIO AO BUSYMUTENARMIDLOWAppears when the pocket beepwith tone squelch is activated.Appears when the pocket beepwith DTCS squelch is activated.T-SCANLOCKS E TANMMONIDUPLOWT-SCANTONEPRIOM/CALLSCANV/MHzDIGITAL PRIO AO BUSYMUTENARMIDLOWDTCS polarity settingLOCKS E TANMMONIDUPLOWT-SCANTONEPRIOM/CALLSCANV/MHzDIGITAL PRIO AO BUSYMUTENARMIDLOWLOCKS E TANMMONIDUPLOWT-SCANTONEPRIOM/CALLSCANV/MHzDIGITAL PRIO AO BUSYMUTENARMIDLOWTone squelch frequency setting DTCS code settingLOCK