8310 DTMF MEMORY ENCODERD Automatic transmission (DTMF memory)qPush and hold [TONE•DTMF] for 1 sec. to enter DTMF setmode.wRotate [DIAL] to select “ DTMF MEMORY, ” then push[MAIN•BAND] to enter DTMF memory screen.eRotate [DIAL] to select the desired DTMF memory channelto be transmitted then push [BACK](V/MHz•SCAN) (Rightband’s).• Returns to DTMF set mode screen.rRotate [DIAL] to select “AUTO TX,” then push[MAIN•BAND].t Rotate [DIAL] to select “ON,” then push [MAIN•BAND].• “☎” appears.yPush [BACK](V/MHz•SCAN) (Right band’s) to exit fromDTMF set mode.uPush [PTT] to transmit the selected DTMF memory content.iTo cancel the DTMF tone sequence automatic transmis-sion, select “OFF” in step t.• When the DTMF encoder is turned ON continuously, each pushof the PTT transmits the previously selected DTMF tone se-quence.z Push [FUNC] then [ LOW 6(DTMF)] to turn theDTMF memory encoder ON.• “☎” appears.x Push [PTT] to transmit the previously selectedDTMF memory.c Push [FUNC] then [SET B(D-OFF)] to cancel theDTMF memory encoder.• When the DTMF encoder is turned ON continuously,each push of the PTT transmits the previously se-lected DTMF tone sequence.DTMF■ Transmitting a DTMF tone sequence
