565DV MODE OPERATION (Optional UT-123 is required)12345678910111213141516171819DD Play-back or erase the voice memoryq Push [F• ] to display the function guide.wPush [MENU](V/MHz•SCAN) (Right band’s) to display the“MENU” screen.eRotate [DIAL] to select “DV VOICE MEMO,” then push[MAIN•BAND].rRotate [DIAL] to select “REPLY VOICE,” then push[MAIN•BAND].tTo play-back the recorded reply voice, push[≈](LOW•PRIO).• Push [||](LOW•PRIO) to pause, push [■](TONE•DUP) to cancelthe play-back.yTo erase the reply voice, push [CLR](DUP•MONI).uPush [BACK](V/MHz•SCAN) (Right band’s) three times toexit from DV VOICE MEMO screen.■ EMR communicationThe EMR communication mode is available for digital modeoperation. In the EMR communication mode, no call sign set-ting is necessary. When an EMR communication mode sig-nal is received, the audio (voice) will be heard at the specifiedlevel even the volume setting level is set to minimum level, ordigital call sign/digital code squelch is in use.qSet the desired frequency in 144 or 440 MHz band.w Push [F• ] to display the function guide.ePush [MENU](V/MHz•SCAN) (Right band’s) to display the“MENU” screen.rRotate [DIAL] to select “DV SET MODE,” then push[MAIN•BAND].t Rotate [DIAL] to select “EMR,” then push [MAIN•BAND].y Rotate [DIAL] to select “ON,” then push [MAIN•BAND].uPush [BACK](V/MHz•SCAN) (Right band’s) twice to exitfrom DV set mode.• “EMR” appearsi Operate the transceiver normally.oTo cancel the EMR communication mode, select “OFF” inEMR at step y.
