9512 PAGER/CODE SQUELCH• PERSONAL CALLSThis display appears when you are called with your ID codeand the calling station’s ID code is 444.• GROUP CALLSThis display appears when you are called with the group code(444), provided 444 has been programmed into code chan-nel C3.• ERROR INFORMATIONWhen the transceiver receives an incomplete code, “E” andpreviously received code appear.■ Code squelchWhen using code squelch you will only receive calls from sta-tions which know your ID or group code. A 3-digit code is senteach time [PTT] is pushed in order to open the receiving sta-tion’s code squelch prior to voice transmission.q Set the operating frequency.• Set the volume and squelch to the desired level as in normal op-eration.w Push [F• ] to display the function guide.e Push [MENU](V/MHz•SCAN) (Right band’s) to enter theMENU screen.r Rotate [DIAL] to select “DUP/TONE…” then push[MAIN•BAND] to enter DUP/TONE set mode.t Rotate [DIAL] to select the “PGR/C-SQL” then push[MAIN•BAND].y Rotate [DIAL] to set “C-SQL” then push [MAIN•BAND].u Rotate [DIAL] to select “PGR MEMORY” then push[MAIN•BAND].i Rotate [DIAL] to select the desired transmit code channel:➥ Rotate [DIAL] to select the desired code channel.➥ Push [BACK](V/MHz•SCAN) (Right band’s) three timesto return to frequency indication.• “C-SQL.” appears.o Operate the transceiver in the normal way (push [PTT] totransmit; release [PTT] to receive).!0 To cancel the code squelch, enter “PGR/C-SQL” set item,then rotate [DIAL] to select “OFF”• “C-SQL” disappears.Previously received code.“E” (error) appearsCode channel“PGR” blinks.
