425DV MODE OPERATION (Optional UT-123 is required)12345678910111213141516171819■ Digital repeater operationRepeater call signs must be programmed for repeater opera-tion in both digital voice and low-speed data communications.DD Repeater call sign programmingq Push [F• ] to display the function guide.wPush [MENU](V/MHz•SCAN) (Right band’s) to enter MENUscreen.eRotate [DIAL] to select “CALL SIGN MEMORY” then push[MAIN•BAND].rRotate [DIAL] to select “RPT CALL SIGN MEMORY” thenpush [MAIN•BAND].tRotate [DIAL] to select the desired call sign channel (R01 toR60), then push [MAIN•BAND].yRotate [DIAL] to select the desired character, then push[>](M/CALL•MW) (Left band’s) to move the cursor right.• Push [<](V/MHz•SCAN) (Left band’s) to move the cursor left.• Push [ABC](TONE•DTMF) to turn the character group from al-phabetical characters capital letters.• Push [12/](M/CALL•MW) (Right band’s) to turn the charactergroup from numbers or symbol.• Push [CLR](DUP•MONI) to clear the selected character.• Push [GW](LOW•PRIO) to turn the gateway setting ON/OFF.u Repeat step y until repeater call sign is programmed.i Push [MAIN•BAND] to store the programmed call sign.oPush [BACK](V/MHz•SCAN) (Right band’s) three times toreturn to frequency indication.
