286 SEARCH AND SCAN OPERATIONSNew2001■ Program searchq Enter “PROGRAM SEARCH” in SEARCH menu.MENU ➪ SEARCH ➪ PROGRAM SEARCH(Push [MENU ]), (Push [r]/[s], then push [ENT MW].)• SEARCH menu can also be entered by pushing and holding[SEARCH] for 1 sec.• Program number selection screen appears.w Push [r] or [s] several times (or rotate [DIAL]) to selectthe desired program number, then push [ENT MW] toenter the program.• A total of 25 program numbers (No. 00 to No. 24) are available.e Push [ENT MW] again to start the search.• Search pauses when a signal is received.• Rotate [DIAL] to change the searching direction.• After started the search, program number can be changed bypushing [v] or [w].r Push [HOLD V] to stop the search temporarily, if desired.• Push [HOLD V] again to restart the search.MWMENUENTHOLD VSCAN.1472580369SKIPNO.CLRSQLDIALSEARCHATTMWENTHOLD VMENUPush MWENTPush MWENTPush MWENTSelected programnumber appearsNOTE: Program searches can be customized, see pages30, 31 for programming details.
