386 SEARCH AND SCAN OPERATIONSNew2001D Memory channel watchq Select the watching memory channel.➥ Push [SCAN] to start a scan, then push [HOLD V] tohold the scan.➥ Rotate [DIAL] to select the channel.• Push and hold [v] or [w] for 1 sec. to change the category,or push [v] or [w] to change the group.w Select VFO mode and set the operating frequency, etc.➥ Push and hold [HOLD V] for 1 sec. to select VFOmode.➥ Set the operating frequency and receiving mode (pgs.19–22).e Enter “PRIORITY” in SEARCH menu.MENU ➪ SEARCH ➪ PRIORITY(Push [MENU ]), (Push [r]/[s], then push [ENT MW].)• SEARCH menu can also be entered by pushing and holding[SEARCH] for 1 sec.r Push [r]/[s] (or rotate [DIAL]) to select “ON.”• Select “BELL” if the priority beep function is desired.t Push [CLR SQL] to return to VFO mode and start thewatch.• “PRIO” indicator appears.• The receiver checks the priority channel every 5 sec.• The watch resumes according to the selected search resumecondition (p. 40), or push [CLR SQL] to resume manually.• Memory channel watchMonitors VFO frequency for5 sec.Pauses on a priority channelwhen a signal is received.• Memory channel watch with priority beepEmits beep and blinks “S” indicator when a signal isreceived on a priority channel.y Push [CLR SQL] to cancel the priority watch.
