New2001839OTHER FUNCTIONS12345678910111213141516171819■ Beep tonesYou can select to have confirmation beeps sound at thepush of a switch. The output level can be adjusted within 40levels with “BEEP LEVEL” in SOUNDS menu.MENU ➪ SOUNDS ➪ BEEP LEVEL (p. 70)(Push [MENU ]), (Push [r]/[s], then push [ENT MW].)You can select silent operation by turning beep tones OFFwith “KEY-TOUCH BEEP” in SOUNDS menu.MENU ➪ SOUNDS ➪ KEY-TOUCH BEEP (p. 70)(Push [MENU ]), (Push [r]/[s], then push [ENT MW].)■ Dial speed accelerationThe dial speed acceleration automatically speeds up thetuning dial speed when rotating [DIAL] rapidly.This function can be turned ON and OFF with “DIALSPEED-UP” in SETTING menu.MENU ➪ SETTING ➪ DIAL SPEED-UP (p. 68)(Push [MENU ]), (Push [r]/[s], then push [ENT MW].)■ Power saveThe power save function reduces the current drain to con-serve battery power.The power save duty cycle, the ratio of receive circuit on toreceive circuit off during standby, can be set to automatic(1 : 4 =125 msec. : 500msec., 1 : 8 =125 msec. : 1000 msec.) (de-fault) or OFF with “POWER SAVE” in SETTING menu.MENU ➪ SETTING ➪ POWER SAVE (p. 67)(Push [MENU ]), (Push [r]/[s], then push [ENT MW].)• “AUTO” selects “1:4” duty ratio when receiving no signal for 5 sec.,then “1:8” 60 sec. after that.125 msec.60 sec.500 msec. 1000 msec.No signal5 sec.Circuit ONCircuit OFF
