New2001658MENU SCREEN OPERATION12345678910111213141516171819D DTCS code (DTCS CODE)Sets DTCS code for DTCS squelch operation. Total of 104codes (023–754) are available. This setting appears onlywhen FM mode is selected. (default: 023)Code 023 setting Code 315 setting• Available DTCS code023025026031032036043047051053125131132134143145152155156162245246251252255261263265266271356364365371411412413423431432506516523526532546565606612624054065071072073074114115116122165172174205212223225226243244274306311315325331332343346351445446452454455462464465466503627631632654662664703712723731732734743754The polarity can also be set in “DTCS polarity” at right.D DTCS polarity (DTCS POLARITY)Sets DTCS polarity from normal and reverse. This settingappears only when FM mode is selected.(default: NORMAL)Normal setting Reverse settingD Voice squelch control (VSC)This function is useful when you don’t want unmodulatedsignals pausing or cancelling a search/scan. When the voicesquelch control function is activated, the receiver checksreceived signals for voice components. If a received sig-nal includes voice components, and the tone of the voicecomponents changes within 1 sec., search/scan pauses (orstops). If the received signal includes no voice componentsor the tone of the voice components does not change within1 sec., search/scan resumes. (default: OFF)VSC is OFF VSC is ON
