New2001416SEARCH AND SCAN OPERATIONS12345678910111213141516171819■ Link scanq Push [SCAN] to start a link scan.• Scan pauses when a signal is received.• Rotate [DIAL] to change the scanning direction.w Push [HOLD V] to stop the scan temporarily, if desired.• Push and hold [v] or [w] for 1 sec. several times to select thedesired category; or push [v] or [w] several times to select thedesired group.• Rotate [DIAL] to select the channel.• Push [HOLD V] again to restart the scan.MWMENUENTHOLD VSCAN.1472580369SKIPNO.CLRSQLDIALSEARCHATTHOLD VSCAN• Scan mode indicationArrow indicatesscanning directionThe category/group link setting can be changed in mem-ory programming. See pages 52, 53 for details.Scan skips any memory channels in the selected cat-egory/group/name that are set to “SKIP” or “PSKIP.” (pgs.52–54)Link scan stops at the first channel when all channels in acategory/group are set to “SKIP” or “PSKIP.” (pgs. 52–54)IMPORTANT!: To perform scan functions, 2 or morememory channels MUST be programmed, otherwise thescans will not start.
