Icom IC-RX7 Instruction Manual

Also see for IC-RX7: Price list Instruction manual Instruction manual Service manual Service manual addendum

Contents

Icom IC-RX7 Instruction Manual Manual pdf 94 page image

869 OTHER FUNCTIONSNew200186■ Cloning functionThe IC-RX7 has receiver-to-receiver data cloning capability.This function is useful when you want to copy all of the pro-grammed contents from one IC-RX7 to another.• An optional OPC-474 cloning cable is required.q Turn the receiver’s power OFF, then connect an optionalOPC-474 between both [SP] jacks as below.to [SP]OPC-474to [SP]Master receiver Sub receiverw Master receiver: While pushing and holding [r] and[MENU ], push and hold [ ] for 1 sec. to entercloning mode.• “MASTER” appears.Sub receiver: Push and hold [ ] for 1 sec. to turn thereceiver power ON. (See right below for more information.)e Push [ENT MW] on the “master” receiver.• “CLONE OUT” appears on the master receiver and “CLONE IN”appears on the sub receiver and the bar meters show that clon-ing is taking place.• After the cloning is completed, the display shows “CLONE END.”r Push and hold [ ] for 1 sec. to turn power OFF.MWMENUENTHOLD VSCAN.1472580369SKIPNO.CLRSQLDIALSEARCHATTMENUMaster receiverSub receiverMWENTThe optional CS-RX7 CLONING SOFTWARE is also availableto clone/edit contents with a PC (for Microsoft® Windows®2000/XP or Windows VistaTM) and using ICF format files.to [SP]PCIC-RX7 OPC-478(RS-232C type)OPC-478UC(USB type)to USB portto RS-232Cport✔ CLONING MODE ENTRY (except Master receiver):When the CI-V baud rate (p. 69) is selected any other than“9600” or “AUTO,” the following operations are required.q Turn the receiver’s power OFF.w While pushing and holding [SCAN], push and hold [ ]for 1 sec. to enter cloning mode.