New2001296SEARCH AND SCAN OPERATIONS12345678910111213141516171819■ Program link searchq Enter “PROGRAM LINK SEARCH” in SEARCH menu.MENU ➪ SEARCH ➪ PROGRAM LINK SEARCH(Push [MENU ]), (Push [r]/[s], then push [ENT MW].)• SEARCH menu can also be entered by pushing and holding[SEARCH] for 1 sec.• Program link number selection screen appears.w Push [r] or [s] several times (or rotate [DIAL]) to selectthe desired program link number, then push [ENT MW] toenter the link edit state.• A total of 10 program link numbers (No. 0 to No. 9) are available.e Push [ENT MW] again to start the search.• Search pauses when a signal is received.• Rotate [DIAL] to change the searching direction.• After started the search, program link number can be changedby pushing [v] or [w].r Push [HOLD V] to stop the search temporarily, if desired.• Push [HOLD V] again to restart the search.NOTE: All program searches are linked in default settings.Program links can be customized, see pages 32, 33 forprogramming details.MWMENUENTHOLD VSCAN.1472580369SKIPNO.CLRSQLDIALSEARCHATTMWENTHOLD VSEARCHPush MWENTPush MWENTPush MWENTSelected linknumber appears
