JBL AV2 User Manual

Also see for Control Series: Assembly instruction guide Owner's guide Owner's manual Owner's guide Owner's manual

Contents

JBL AV2 User Manual Manual pdf 29 page image

JBL ® Performance™ Series AV2 Audio/Video Processor Setup3-3DISPLAY SETUPSelecting the SETUP menu, DISPLAY SETUP option opens the DISPLAY SETUP menu, which is used to customize the OSD and front panel displayand set up other display-related features.CONNECTION ANALOG, HDMI/DVISelects the CONNECTION parameter, which identifies the activevideo output connectors on the AV2 rear panel. The following list ofconditions identify the behavior of this parameter:• If ANALOG is selected, only the analog video connectors areavailable and will output the video signal.• If HDMI/DVI is selected, both the analog and HDMI videoconnectors are available and will output the video signal.• If the video input is set to HDMI and the CONNECTIONparameter is set to ANALOG, then no video is output.• If the HDMI video input is copy-protected (HDCP), no video isoutput on the analog output connectors. This is a requirementof HDCP and not a limitation of the AV2 processor.HDMI AUDIO OUT YES, NOSelects the HDMI AUDIO OUT parameter, which identifies if audio issent on the HDMI output. If the HDMI AUDIO OUT parameter is setto YES, then a two-channel DOWN MIX of the source audio is sentover the HDMI connection at the maximum bit rate of the display’saudio system. This audio stream is in addition to the normal audiooutputs. If the parameter is set to NO, this audio is not sent.ON-SCREEN DISPLAYtwo-line OSD: 3sMENU TIME OUT: 30sFRONT PANEL DISPLAYBRIGHTNESS: FULLTIME OUT: NONEMAIN MENUAUDIO CONTROLSVIDEO CONTROLSDISPLAY SETUPSPEAKER/EQ SETUPINPUT SETUPSURROUND CONFIGDOLBY CONFIGMUTE LEVELSPOWER ON SETTINGSSETUPSETUP DISPLAY SETUPCONNECTION: HDMI/DVIHDMI AUDIO OUT: NOON-SCREEN DISPLAYFRONT PANEL DISPLAYBASSQ*: NO*CHECK MANUAL FIRSTDISPLAY SETUPSETUP CONNECTION DISPLAY SETUPSETUP HDMI AUDIO OUT