JBL AV2 User Manual

Also see for Control Series: Assembly instruction guide Owner's guide Owner's manual Owner's guide Owner's manual

Contents

JBL AV2 User Manual Manual pdf 35 page image

JBL ® Performance™ Series AV2 Audio/Video Processor Setup3-9MANUAL SPEAKER SETUPSelecting the SETUP menu SPEAKER/EQ SETUP menu, MANUAL option opens the MANUAL menu, which is used to manually set the speakerdistances, crossover points and output levels.AUTO SETTINGS OFF, ONLoads the values from the active preset into the speaker crossoverpoints, distances or output level parameters. The Speakers (crossoverpoints), Speaker Distances and Output Levels menus all have an AutoSettings parameter. All three are the same parameter, but each affectsthe individual sub-menus separately and independently of eachother.If the Auto Settings parameter is set to ON, the parameters in thatmenu cannot be manually changed until the Auto Settingsparameter is set to OFF.Note: Any manual settings will be lost if the active preset settings areloaded; if Auto Settings is set to ON in the Speakers, Speaker Distances orOutput Levels menus, then previous parameter values will be overwritten.MANUALSPEAKERSSPEAKER DISTANCESOUTPUT LEVELSSPEAKERSAUTO SETTINGS: OFFFRONT L/R: 80HzCENTER: 80HzSIDE L/R: 80HzREAR/Z2 L/R: 80HzSUB/LFE LPF: 80HzSUBWOOFERS: 1SUB HPF: 20HzSUB MODE: NORMALSPEAKER DISTANCES 1AUTO SETTINGS: OFFUNITS: FEETFRONT LEFT: 0.0 ftCENTER: 0.0 ftFRONT RIGHT: 0.0 ftSIDE RIGHT: 0.0 ftREAR RIGHT: 0.0 ftREAR LEFT: 0.0 ftSPEAKER DISTANCES 2SIDE LEFT: 0.0ftSUBWOOFERS: 0.0 ftOUTPUT LEVELS 1AUTO SETTINGS: OFFINPUT: ALLTEST TONE: AUTOFRONT LEFT: 0dBCENTER: 0dBFRONT RIGHT: 0dBSIDE RIGHT: 0dBREAR RIGHT: 0dBOUTPUT LEVELS 2REAR LEFT: 0dBSIDE LEFT: 0dBSUBWOOFER1: 0dBSUBWOOFER2: 0dBSPEAKER/EQ SETUPSETUPSETUP SPEAKER/EQ SETUP MANUAL AUTO SETTINGS