JBL ® Performance™ Series AV2 Audio/Video Processor Setup3-33MUTE LEVELSSelecting the SETUP menu, MUTE LEVELS option opens the MuteLevels menu, which is used to adjust the mute levels of both the MainZone and Zone 2 audio outputs.MAIN ZONE FULL, –10, –20, –30, –40dBAllows you to choose different levels of attenuation for Main Zoneaudio muting. The FULL setting completely mutes the box. The otheravailable settings perform incremental muting.ZONE 2 FULL, –10, –20, –30, –40dBAllows you to choose different levels of attenuation for Zone 2 audiomuting. The FULL setting completely mutes the box. The otheravailable settings perform incremental muting.POWER ON SETTINGSSelecting the SETUP menu, POWER ON SETTINGS option opens thePower On Settings menu, which provides user preferences to thePower On Volume and Dock Auto Power settings.POWER ON VOL LAST, –80dB TO –10dBIdentifies the starting volume level when the AV2 is powered on. TheLast parameter sets the volume to the same volume that existedwhen the unit was put into Standby or powered off from the rearpanel switch. The Power On Volume can be set from –80dB to –10dBin 1dB increments.DOCK AUTO POWER OFF, ONIf the Dock Auto Power parameter is set to ON, then if an iPod isplaying when plugged into the dock, it will take the AV2 out ofStandby mode and select the Dock input. If the Dock Auto Powerparameter is set to OFF, then the AV2 does not respond when aMAIN MENUAUDIO CONTROLSVIDEO STATUSDISPLAY SETUPSPEAKER/EQ SETUPINPUT SETUPSURROUND CONFIGDOLBY CONFIGMUTE LEVELSPOWER ON SETTINGSSETUPSETUP MUTE LEVELSMAIN ZONE: -30dBZONE-2: -30dBBASSQ*: NO*CHECK MANUAL FIRSTMUTE LEVELSSETUP MAIN ZONEMUTE LEVELSSETUP ZONE-2MAIN MENUAUDIO CONTROLSVIDEO STATUSDISPLAY SETUPSPEAKER/EQ SETUPINPUT SETUPSURROUND CONFIGDOLBY CONFIGMUTE LEVELSPOWER ON SETTINGSSETUPSETUP POWER ON SETTINGSPOWER ON VOL: -30dBDock AUTO POWER: ONBASSQ*: NO*CHECK MANUAL FIRSTPOWER ON SETTINGSSETUP POWER ON VOLPOWER ON SETTINGSSETUP Dock AUTO POWER