JBL AVR580 Owner's Manual

Also see for AVR580: Quick start guide

JBL AVR580 Owner's Manual Manual pdf 8 page image

8FRONT-PANEL INFORMATION DISPLAYA Upper Display LineB Lower Display LineC OSD IndicatorD Multiroom IndicatorE Speaker/Channel Input IndicatorsF PRESET IndicatorG MEMORY IndicatorH STEREO IndicatorI TUNED IndicatorJ AUTO IndicatorK 192kHz IndicatorL 96kHz IndicatorA Upper Display Line: Depending onthe unit’s status, a variety of messages willappear here. In normal operation, the cur-rent audio and video input source informa-tion will appear on this line.B Lower Display Line: Depending onthe unit’s status, a variety of messageswill appear here. In normal operation, thecurrent surround mode name will appearon this line.C OSD Indicator: When the OSD sys-tem is in use, this indicator lights toremind you that the other indicators inthis display do not function when the On-Screen Display is being used.D Multiroom Indicator: This indicatorlights when the multiroom system isactive. It will remain lit when the multi-room system is in use even though themain room system is in the Standby modeand all other indicators are dark. (Seepage 39 for more information on theMultiroom system.)E Speaker/Channel Input Indicators:These indicators are multipurpose, indicat-ing either the speaker type selected foreach channel or the incoming data-signalconfiguration. The left, center, right, sidesurround and surround back speaker indi-cators are composed of two boxes, whilethe subwoofer is a single box. The centerbox lights when a “Small” speaker isselected, and the outer boxes light when“Large” speakers are selected. When noneof the boxes are lit for the center, surroundor subwoofer channels, no speaker hasbeen selected for one of those positions.(See page 24 for more information onspeaker setup.) The letters inside each ofthe center boxes display the active inputchannels. For standard analog inputs, onlythe L and R will light, indicating a stereoinput. When a digital source is playing, theindicators will light to display the channelsbeing received at the digital input. Whenthe letters flash, the digital input has beeninterrupted. (See page 32 for more infor-mation on the channel indicators.)F PRESET Indicator: This indicatorlights when the tuner is in use to showthat the present number for the currentstation being listened to appears in theUpper Display Line. (See page 35 formore information on tuner presets.)G MEMORY Indicator: This indicatorflashes when entering presets and otherinformation into the tuner’s memory.H STEREO Indicator: This indicatorlights when an FM station is being tunedin stereo.I TUNED Indicator: This indicator lightswhen a station is being received with suf-ficient signal strength to provide accept-able listening quality.J AUTO Indicator: This indicator lightswhen the tuner’s Auto mode is in use.K 192kHz Indicator: This indicatorlights when the digital audio input sourcehas a 192kHz bit rate.L 96kHz Indicator: This indicatorlights when the digital audio input sourcehas a 96kHz bit rate.