Jenn-Air JDRP548WP02 Use & Care Manual

Also see for JDRP430WP01: Installation instructions

Contents

Jenn-Air JDRP548WP02 Use & Care Manual Manual pdf 14 page image

!% _The following demonstrates how to program a Bake cycle,starting at the Modes menu.1. Touch the MODES tab to move to the Modes menu.2. From the Modes menu, touch BAKE. You will move to theTemperature screen.3. Use the slider to enter a desired cooking temperature ortouch the -5°F (-1 °C) or +5°F (+1°C) buttons. The temperaturemust be between 170°F (77°C) and 550°F (288°C).[] []2OO" 25O_ 300" 350_ 400_ 450 _ 500° 550"K_c e_ theThe Kitchen Timer is an independent timer not associated withthe Cook Timers.1. Touch the KITCHEN TIMER button anytime needed.2. Enter the desired time (- : : -) using the on-screennumber keyboard.3. Touch CLEAR to clear timer back to (- : : -).4. Touch START TIMER to initiate the function.5. Touch CLOSE to hide the Kitchen Timer panel.While the Kitchen Timer is running, the timer is minimized tothe bar at the right-hand side of the screen.6. To adjust the Kitchen Timer while running, touch ADJUST andchoose "Cancel timer" or use the on-screen numberkeyboard to enter a new time.7. If "Cancel timer" is touched, the timer is canceled and thepanel is hidden.8. When the Kitchen Timer is complete, a beep will sound.9. When time expires, it is possible to add extra time bytouching the Add More Time button. Use the on-screennumber keyboard to enter additional time.10. To hide the panel, touch OK.4.5.Touch START to begin preheating the oven.ORIf a Cook Time, Keep Warm TM or Delay Start function isdesired, touch TIMER NOT SET to enter the Cook Timerscreen.To set a cook time, enter a cooking length using the on-screen number keyboard. A timer will alert you when cookingends. The time length may not exceed 12:00:00. See the"Cook Timer" section for more information.6. (Optional) To set a delayed start, touch DELAY START andSET DELAY. See "Delay Start" section for additionalinformation.7. (Optional) To keep food warm after cooking ends, set KeepWarm ON. See "Keep Warm TM Option" section for additionalinformation.8. Press START to begin preheating the oven.9. Place food in the oven when preheat signal sounds. Thescreen will say "Insert food and Set Timer, if desired."10. Touch CANCEL (CANCEL LEFT or CANCEL RIGHT on48" [121.9 cm] models) to turn off the oven.This oven provides ability to control several of the default settingsand access information through the on-screen display. Theseinclude: Lock Buttons Now, Automatic Lock, Self-clean, SoundVolume, Set Time, Set Date, Clock Options, Sabbath Mode,Screen Brightness, Screen Appearance, Language, RegionalSettings, Touchscreen Calibration, Temperature Calibration,Learning Mode, Service Information and Reset All Settings.To access the Setup menu:1. Touch SETUP MENU.2. Use the scroll bar on the right-hand of the screen to view andaccess settings.3. If the oven is in use, SETUP MENU is disabled.Lock Buttons NowThe Lock Buttons Now function allows all the buttons to belocked. This setting is automatically disabled if the Kitchen Timeris running or the oven is in use.Slide bar up on main screen above "Slide to unlock" to unlockbutton/screen.Automatic LockTo activate the automatic lock function, press "Automatic Lock."Slide bar up on main screen to unlock buttons/screen. Todeactivate this function, press "Automatic Lock" in the SetupMenu.Set Time1. From the Setup Menu, touch SET TIME.2. Enter the time using the on-screen number keyboard. A validtime must be entered in order to save the settings.3. If Clear is pressed, the clock clears to 00:004. ChooseAM or PM.5. Touch SAVE. This will return you to the Clock Screen.14