Kärcher SB-Wash 50/10 Manual

Also see for SB-Wash 50/10: Manual

- 81 Water connection (by customer)2 Pipe disconnector (optional)3 salt tank (optional)4 base exchanger (optional)5 Control head (optional)6 condensing electro motor7 swimming valve8 Swimming container anti freeze9 swimming valve10 proportioning device water softener flu-id (RM 110, optional)11 Swimming container fresh water12 filter anti freeze pump13 Centrifugal pump14 Strainer15 Back up valve16 Proportioning valve cleaning agent17 Reactor *)18 High pressure pump19 Manometer *)20 Overflow valve *)21 Dosing pump22 Cleaning agent filter23 Cleaning agent container24 Fuil container25 Fuil pipeline26 Burner fan27 Fuil pump inclusive bypass valve28 Flow indicator29 Fuil valve30 Flame indicator31 Burner inclusive flow-type heater32 Temerature limiter33 Attemperator34 Trigger gun*) in the cylinder head of the high pressurepump.During cleaning, the water flows through– Water connection– base exchanger (optional)– condensing electro motor– High pressure pump– Continuous heater– to hand-spray gun.If there is danger of frost, the water is flowsthrough the following cycle:– Swimmer tank with anti-freeze– Centrifugal pump– High pressure hose– Trigger gun– Swimmer tank with anti-freezeWhen the softening capacity of the baseexchanger is 80% depleted, a regenerationis performed in the following nightIf the burner does not firem, or the flamegoes out during the operation, then theflame indicator does turn off the flow of thefuel.If the lever of the hand blowing gun is letloose during the operation, then the cyclevalve will open, and the high pressurepump will stay in operation. When openingthe blowing gun gain, the high pressure jetdoes function.Does avoid, that the burner is turned on, ifthere is a lack of water.If the power supply is interrupted becauseof a short circuit or overload.IThe motor power supply is interrupted be-cause of overheating.Adjusts the warm ater temperature accord-ing to the setting.The burner turns off at the temperature of75 °C .Turns on the anti freeze cycle by danger offrost (unter 3 °C) .FunctionFlow patternFunctional descriptionMonitoring and safety devicesHardness sensor in the baseexchanger (option)Flame indicatorOverflow valve *)Flow indicatorCircuit breakerWinding head thermostatAttemperatorTemperature limitorAnti freeze thermostat32 EN