KEB COMBIVERT F4-C Applications Manual

Also see for COMBIVERT F4-C: Instruction manual

Contents

3ANTRIEBSTECHNIK6 10 3KEB COMBIVERT F4-CName: Basis19.11.986Section PageDate© KEB Antriebstechnik, 1997All Rights reservedChapterFunctional DescriptionEncoder InterfaceSTARTSTOPENTERF/RFUNC.SPEEDSTARTSTOPENTERF/RFUNC.SPEEDËË6.10 Encoder Interface6.10.1 Encoder SummaryTwo independent channels for the speed measurement are supported, which can beused both as actual speed detection for speed control and as setpoint value source.Thus allowing the realization of speed synchronous drives. Position detection,positioning and angular synchronous operation are not supported.Channel 1 supports a standard incremental encoder interface. Channel 2 can processin different versions incremental encoders, tacho generators, initiators or +/-10 Vsignals.Units with integrated encoder interface are registered according to the following code:XX.F4.CXX-XLXXVersion number ( starts with 0 )Interface type ( see table Interface Types )L ( code letter for integrated encoder interface )4 ( Special unit 400V )5 ( Special unit 230V )Interface Type Channel 1 Channel 2 Separate Supply *)0 encoder interface Tacho input yes1 encoder interface encoder interface yes2 encoder interface +/- 10V input yes3 encoder interface Initiator yes*) Separate supply means, that control inclusive encoder interface are supplied withenergy from an external voltage source. Thus status and error messages are storedeven when disconnecting the power circuit.Customer-specific units maydeviate from this code!Fig. 6.10.1 Encoder summary Housing size D and EFrom housing size G upwardsEncoder interface with tacho inputEncoder interface with tacho inputEncoder interface with 2nd encoderEncoder interface with 2nd encoderEncoder interface with ±10V inputEncoder interface with ±10V inputEncoder interface initiatorEncoder interface mit initiator