3ANTRIEBSTECHNIK4 2 3KEB COMBIVERT F4-CName: Basis09.02.984Password Structure© KEB Antriebstechnik, 1997All Rights reservedOperationSection PageDate Chapter4.2 PasswordStructureThe KEB COMBIVERT is provided with extensive password protection. The differentpasswords are used to- change the operating mode- set a write protection- activate the Service-Mode- switch to the Drive-ModeDepending on the actual operating mode the password can be entered in followingparameterswhen the CP-Mode is activewhen the applicatioan mode is activeThe parameter value of the above parameters shows the actual password level.Following indications are possible:CP - read onlyCP - onCP - ServiceApplicationDrive-Mode4.2.1 Password LevelsOnly the Customer-parametergroup is visible, exept for CP.0 allparameters are in the read-onlystatus (see Chapter 4.3).Only the Customer-parametergroup is visible. All parameters canbe changed.Like CP-on, but the parameteridentification is indicated accordingto the original parameter (seeChapter 4.3).All application parameters arevisible and can be changed. TheCP-parameters are not visible.The Drive-Mode is a specialoperating mode, here the unit canbe put into operation via theoperator (see Chapter 4.4).