KEB COMBIVERT F4-C Applications Manual

Also see for COMBIVERT F4-C: Instruction manual

Contents

3ANTRIEBSTECHNIK1 1 305.01.99KEB COMBIVERT F4-CName:Basis1IntroductionGeneral© KEB Antriebstechnik, 1997All Rights reservedChapter Section PageDateThis chapter shall allow a fast access to the wanted information. It consists of contents,index and search criterion.Here the inverter and its features as well as the operating conditions and applicationpurpose are described.Description of hardware, technical data of the inverter as well as connection of powerand control terminals.The basic operation of the KEB COMBIVERT like password input, parameter and setselection.A list of all parameters classified according to parameter groups. The parameterdescription comprises addresses, value ranges and references with regard to thefunctions for which they are used.To make the programming easier all inverter functions and the parameters belongingto it are comprised in this chapter.Gives support with regard to the initial start-up and shows possibilities and techniquesfor the optimization of the drive.Describes special operating modes, like e.g. DC-coupling.Avoidance of errors, evaluation of error messages and elimination of the causes.Survey of the possible interconnection in existing networks; address and value tablefor the implementation in own protocols.Survey of the possible interconnection of the KEB COMBIVET in existing networks.In this chapter you find descriptions of some applications which may give new impulsesor help to solve own applications.Everything that didn’t fit anywhere else or what we didn’t think of earlier.1. Introduction2. Summary3. Hardware4. Operation5. Parameter6. Functions7. Start-up8. Special Operation9. Error Assistance10. Project Planning11. Networks12. Applications13. Annex