KERN EG 220-3NM Operating Instruction

Also see for EG 220-3NM: Service manual Operating instruction

Contents

KERN EG 220-3NM Operating Instruction Manual pdf 14 page image

EW/EG-N/EWB-e-1627145 Unpacking, installation and commissioning5.1 Place of installation, place of useThe balance is constructed in such a way that reliable weighing results can beachieved under normal application conditions.By selecting the correct location for your balance, you will be able to work quicklyand precisely.Therefore please observe the following at the place of installation:- Place the balance on a firm, level surface;- Avoid extreme heat as well as temperature fluctuation caused by installingnext to a radiator or in the direct sunlight;- Protect the balance against direct draughts due to open windows and doors;- Avoid jarring during weighing;- Protect the balance against high humidity, vapours and dust;- Do not expose the device to extreme dampness for longer periods of time. In-admissible bedewing (condensation of air moisture on the device) can occur ifa cold device is taken into a significantly warmer environment. In this case,please acclimatise the device for approx. 2 hours at room temperature after ithas been disconnected from the mains.- Avoid static charging of the material to be weighed, weighing container andwindshield.Major display deviations (incorrect weighing results) are possible if electromagneticfields occur as well as due to static charging and instable power supply. It is thennecessary to change the location.