EW/EG-N/EWB-e-1627426.2.4.2 Entering the limit values by weighingImportant information !Always begin by entering the lower limit value, followed by the upper limitvalue.Operation Display1. Use the key to switch the balanceon.Set to tolerance weighing:Press the key until [L. SEt] appearsand then release.2. The tolerance mark will flash [ - ].The lower limit value can be set.Place a sample for the lower (i.e. small-er) limit value on the weighing plate:Store using the key. The stored lowerweight value is displayed briefly.Entry is now completed if 1 tolerancemark was selected in the basic setting(see chap. 7.2.1).ο 0 I I I F0.000 gL. SEtM 0.000 gM 93.835 g
