Kanguru U2-DVDDUPE-S User Manual

Contents

Kanguru U2-DVDDUPE-S User Manual Manual pdf 14 page image

143.4 CopyThe Copy function will guide you through making CD/DVD/BD copies.3.4.1 Making disc to disc copiesThe Copy process will copy your master disc onto a single or multiple blank discs simultaneously. Due toits simultaneous nature, a master disc in good condition and lower recording speeds are recommended forbetter quality duplications.Counter :No CounterKanguru Solutions1. Copy1. From the Main Menu, press the UP or DOWN buttonto navigate to Copy. Press the ENT button to enter theCopy menu.2. You will see the Counter screen. For more informationon the Counter, see section “3.2.2 Setting a Job Counter”on page 11.Once you have set the Counter, any trays that do not contain discs in them will automatically be ejected.You will see the following Preparation screens:Preparing...Waiting for MasterPreparing...Waiting for Blanks3. Insert your Master disc into the Reader drive and blank discs into the Writer drives.Note: For a disc-to-disc copy, the master disc can be inserted in any of the disc drives. The Reader isnormally the 1st drive at the top of the tower. You can switch which drive is used as the Reader by changingthe Select Source setting. For more information, see section 3.10 Select Source, p.30.After you’ve loaded the drives with discs, close the trays and allow 5 - 10 seconds for the system to detectthem. If either of the preparation screens are displayed for more than 2 minutes after you have inserted yourdiscs, please check the quality of the discs.Once all the discs have been recognized, you will see the Confirmation screen.Copy