Kanguru U2-DVDDUPE-S User Manual

Contents

Kanguru U2-DVDDUPE-S User Manual Manual pdf 38 page image

383.13.5 CD Writing ModeThe CD Writing Mode setting allows you to select the CD writing method. The default setting is Disc atOnce.There are two CD Writing Mode settings:• Disc at Once - all tracks are recorded without the laser ever stopping, and the disc is closed. It isstrongly advised to leave this setting as Disc at Once.• Track at Once - Each time a track is finished, the recording laser is stopped, and two run-out blocksare written. When the laser starts writing another track, one link block and four run-in blocks arewritten.Setup5. CD Writing ModeCD Writing ModeDisc at Once1. From the Setup Menu, press the UP or DOWN button tonavigate to CD Writing Mode. Press the ENT button toenter the CD Writing Mode menu.2. Press the UP or DOWN button to select the CD WritingMode. Press the ENT button to confirm your selection.You will exit to the Setup Menu.CD Writing Method