Kanguru U2-DVDDUPE-S User Manual

Contents

Kanguru U2-DVDDUPE-S User Manual Manual pdf 18 page image

183.5 CompareThe Compare function will perform a bit-by-bit comparison between your master disc (or master image onthe hard drive) and all the copies. The reason for performing this Compare operation is to ensure that all ofyour copies contain data identical to the master.Counter :No CounterKanguru Solutions2. Compare1. From the Main Menu, press the UP or DOWN button tonavigate to Compare. Press the ENT button to enter theCompare menu2. You will see the Counter screen. For more informationon the Counter, see section “3.2.2 Setting a Job Counter”on page 11.Once you have set the Counter, any trays that do not contain discs in them will automatically be ejected.You will see the following Preparation screens:Preparing...Waiting for MasterPreparing...Waiting for Blanks3. Insert discs into the drives.After you’ve loaded the drives with discs, close the trays and allow 5 - 10 seconds for the system to detectthem. If either of the preparation screens are displayed for more than 2 minutes after you have inserted yourdiscs, please check the quality of the discs.Once all the discs have been recognized, you will see the confirmation screen.Preparing :7 Discs Detected : Go?Preparing...Please WaitNote: The “7” indicates that there are seven discs recognizedby the Writers. The actual quantity may be differentdepending on the number of discs you have inserted.4. When the number of discs detected matches the numberof blank discs you inserted, press the ENT button. Youwill see the Processing screen.Compare