Kanguru U2-DVDDUPE-S User Manual

Contents

Kanguru U2-DVDDUPE-S User Manual Manual pdf 24 page image

243.8 Test & CopyThe Test & Copy function combines the Test function (see section “3.7 Test” on page 22) and theCopy function (see section “3.4 Copy” on page 14). The Test & Copy function will simulate the testingprocess and once the discs pass the Test process, the Copy process will begin automatically. If there’s anerror during the simulation, an error message will be displayed on the screen and the copying process willnot be initiated.Counter :No Counter1. From the Main Menu, press the UP or DOWN button tonavigate to Test & Copy. Press the ENT button to enterthe Test & Copy menu.2. You will see the Counter screen. For more informationon the Counter, see section “3.2.2 Setting a Job Counter”on page 11.Kanguru Solutions5. Test & CopyOnce you have set the Counter, any trays that do not contain discs in them will automatically be ejected.You will see the following Preparation screens:Preparing...Waiting for MasterPreparing...Waiting for Blanks3. Insert discs into the drives.After you’ve loaded the drives with discs, close the trays and allow 5 - 10 seconds for the system to detectthem. If either of the preparation screens are displayed for more than 2 minutes after you have inserted yourdiscs, please check the quality of the discs.Once all the discs have been recognized, you will see the Confirmation screen.Preparing :7 Discs Detected : Go?Preparing...Please WaitNote: The “7” indicates that there are seven discs recognizedby the Writers. The actual quantity may be differentdepending on the number of discs you have inserted.4. When the number of discs detected matches the numberof blank discs you inserted, press the ENT button. Youwill see the Processing screen.Test & Copy