Kanguru U2-DVDDUPE-S User Manual

Contents

Kanguru U2-DVDDUPE-S User Manual Manual pdf 36 page image

363.13.2 Duplication ModeThe Duplication Mode setting is for Kanguru Duplicator systems with a hard drive installed. If you purchaseda Kanguru Duplicator with a hard drive installed, the Duplication Mode setting allows you to select howyou want to make disc to disc duplications.There are three duplication modes:• Load and Copy (hard drive models only) - Allows faster duplication from the hard drive bysimultaneously copying to the blank media in the writer drives while loading an image of the masterdisc to the hard drive. Starting from the 2nd round of duplications, all subsequent copies will becreated using the master image loaded onto the hard drive as the copy source. The image will beloaded onto the RES.VEF partition. If there is already an image on the RES.VEF partition then thiswill copy over the existing image.• On the Fly (default) - Instructs the system to copy directly from the master disc. When using On theFly mode, no information is stored on the hard drive.• Prompt (hard drive models only) – The system will ask you to select the Duplication Mode prior toperforming a copy process.Note: If your system did not come with a hard drive installed, you will be able to enter the DuplicationMode menu, but you will only be able to select On the Fly.Setup2. Duplication ModeDuplication ModeOn The Fly1. From the Setup Menu, press the UP or DOWN button tonavigate to Duplication Mode. Press the ENT button toenter the Duplication Mode menu.2. Press the UP or DOWN button to select a DuplicationMode. Press the ENT button to confirm your selection.You will exit to the Setup Menu.Duplication Mode